About us

Established in 1893 URACA operates worldwide as one of the leading manufacturer of high pressure reciprocating pumps. The comprehensive high pressure water jetting technology includes pump units, sewer cleaning pumps, accessories such as spray guns, nozzles and customized systems.
The company’s main field of activity is the design and production of high pressure plunger pumps and units for operating pressures up to 3,000 bar / 43,500 psi and motor ratings up to 3,500 kW / 4,700 HP according to international standards (e.g. API 674). Quality is the highest premise for URACA and the base for their success. The handling liquids - cold or hot, low viscous or pasty, aggressive, abrasive, toxic - as well as liquid gas open wide fields of applications.
The hydrodynamic cleaning of most diverse parts as well as the internal cleaning of autoclaves, spray towers, tanks, containers etc. are one main application.
URACA’s unlimited service orientation is reflected in the long lasting partnerships with most of their customers.

Products and services

  • High pressure reciprocating plunger pumps
  • API 674 pump units
  • Ultra high pressure pumps
  • Process pumps
  • Chemical injection pump units
  • Injection pump units for oil and gas fields
  • High pressure pumps for abrasives and high temperatures
  • Diaphragm process pumps
  • Hydrostatic pressure test units
  • Sewer cleaning/flushing pumps
  • UHP water jetting pump units and equipment
  • High pressure spray/blasting guns
  • Rotating nozzles
  • Surface cleaners and tube cleaning devices
  • TWK tank cleaning heads
  • Reactor cleaning systems, positioning devices
  • Heat exchanger cleaning equipment
High Pressure Pump Unit KD823 for liquid Ammonia

Energy efficient high pressure pump units for Urea production, e.g. for liquid ammonia or liquid carbamate. Power rates up to 4.700 HP and flow rates up to 10.500 l/min. Fluid temperatures up to 400 °C. URACA development of suction and discharge valves realizes a minimization of the clearance volume. In combination with a maintenance-free discharge pulsation damper, residual pulsations below API 674 Approach 2 can be reached. Pulsation dampers are either of ball or cylinder design.

Further reading

High Pressure Pump unit P5-70

High pressure pumps according to API 674 are used for multiple process technologies and for up and down stream applications, i.e. for glycol and methanol injection where pressures of up to 800 bar are handled.
Typical downstream application is water injection into the cracking process. Project specific solutions for fluid temperatures of up to 400°C are available. In refineries high operating reliability and long service intervals are to be fulfilled.

Further reading

Pump Unit P3-10 for liquid Carbon Dioxide

High pressure Pump Unit for extraction processes with liquid CO2. The pumps are suitable for industrial use and laboratories. They work at pressures of up to 1,000 bar and handle high mass flows. Carbon dioxide is used particularly in the food, beverage, cosmetics and pharmaceutical industry for extracting natural substances, aromas, fats, oils, waxes, polymers, enzymes and colorants in their supercritical physical state.

Further reading

Address
URACA GmbH & Co. KG
Sirchinger Str. 15
72574 Bad Urach
Germany

Phone: +49 7125 1330
Fax: +49 7125 133202
Internet: www.uraca.com
E-mail: Send message

Contact person

Gunter Stoehr
Managing Director
Phone: +49 7125 133221
E-mail: Send message

Representative
ITCCON SERVICES PVT. LTD
B–79, Sector–36
Noida–201 303 (near Delhi)
India

Phone: +91 120 4231336
Fax: +91 120 4231335
Internet: www.uraca.com
E-mail: Send message

Click here if you notice an image that violates copyright or privacy rights.

Get in contact
OK

We use cookies and the web analysis tool Matomo in order to optimally design and continuously improve our website for you. By continuing to use our website, you agree to this. Further information and an objection possibility can be found here: Data protection